venting1 161x300  Venting Options venting2 161x300  Venting OptionsWhen any Sonofresco Roaster is used indoors it must be vented outdoors to remove heat, exhaust gasses, and the minimal amount of smoke created during roasting. Sonofresco offers two venting systems; a simple direct Vent Kit, and a Power Vent Hood to match the Roaster which includes an extraction fan and light. You may also construct your own venting system, keeping in mind that you must do it in a way that does not create any back pressure on the Roaster. Our technical staff is happy to advise customers about their venting needs.

The attractive Vent Hood (120v only) provides an extraction fan and light above the Roaster. Available in Red or Stainless Steel to match your Roaster, fits both 1-lb. and 2-lb. Roasters.

Installation instructions and drawings for Vent Hood

venting4  Venting Options

2-lb. Roaster Venting Kit

venting3 300x215  Venting Options

1-lb. Roaster Venting Kit

The Vent Kit provides the pipe and fittings to directly run the exhaust from the top of the Roaster through the nearest exterior wall or ceiling.

Vent kits are available for both the 1-lb. and 2-lb. Roaster.

Installation Examples

CR1S W VENT KIT 300x280  Venting Options

Click image to enlarge

CR1S W VENT hood1 296x300  Venting Options

Click image to enlarge