PARTS C

Showing all 10 results

Roaster Vent Hood
Roaster Vent Hood

Roaster Vent Hood

$600.00$650.00

When any Sonofresco Roaster is used indoors it must be vented outdoors to remove heat, exhaust gasses, and the minimal amount of smoke created during roasting. Sonofresco offers two venting systems; a simple direct Vent Kit, and a Power Vent Hood to match the Roaster which includes an extraction fan and light. You may also construct your own venting system, keeping in mind that you must do it in a way that does not create any back pressure on the Roaster. Our technical staff is happy to advise customers about their venting needs.

The attractive Vent Hood (120v only) provides an extraction fan and light above the Roaster. Available in Red or Stainless Steel to match your Roaster, fits both 1-lb. and 2-lb. Roasters.

Installation instructions and drawings for Vent Hood

DIRECT VENT KIT
DIRECT VENT KIT

Direct Vent Kit

$315.00

When any Sonofresco Roaster is used indoors it must be vented outdoors to remove heat, exhaust gasses, and the minimal amount of smoke created during roasting. Sonofresco offers two venting systems; a simple direct Vent Kit, and a Power Vent Hood to match the Roaster which includes an extraction fan and light. You may also construct your own venting system, keeping in mind that you must do it in a way that does not create any back pressure on the Roaster.

The Vent Kit provides the pipe and fittings to directly run the exhaust from the top of the Roaster through the nearest exterior wall or ceiling.

Conversion to Propane – One Pound Roaster CR1S
Conversion to Propane – One Pound Roaster CR1S

1lb Conversion Kit LP

$280.00

Fuel Conversion Kit to Propane,

Fits all 2014 and newer CR1S – One pound coffee roasters.

(Includes L.P. hose and regulator assembly)