You are here:
Sale!

Direct Vent Kit

$425.00$500.00Save $75.00

When any Sonofresco Roaster is used indoors it must be vented outdoors to remove heat, exhaust gasses, and the minimal amount of smoke created during roasting. Sonofresco offers two venting systems; a simple direct Vent Kit, and a Power Vent Hood to match the Roaster which includes an extraction fan and light. You may also construct your own venting system, keeping in mind that you must do it in a way that does not create any back pressure on the Roaster.

The Vent Kit provides the pipe and fittings to directly run the exhaust from the top of the Roaster through the nearest exterior wall or ceiling.

Sku: 8052009

In stock

In stock

You may also like

Sale!
Natural gas conversion kit CR2 post 2024 mounted on a black metal base with valve, tubing, and cylindrical burner.

Kit, Fuel Conversion To Natural Gas, CR2 Post 2024

$340.00$400.00Save $60.00
Kit, Fuel Conversion To Natural Gas, CR2 Post 2024 Note: This valve requires…
Sale!
Sensor upgrade kit with control panel, gas and power switches, and metal temperature probe for 2 lb pre-2014 roaster.

Sensor Upgrade w/ board 2lb Pre 14'

$212.50$250.00Save $37.50
With board – PRE 2014 Two pound Roasters
Sale!
Silver metal measuring can with ribbed sides and an open top.

Green Bean Measure Can

$5.10$6.00Save $0.90
Replacement measuring can for both one and two pound coffee roasters.
Sale!
Chaff Collector with Wall - 1lb roaster1lb Chaff Collector Assembly with wall

1lb Chaff Collector Assembly

$96.90$114.00Save $17.10
Chaff collector assembly for the one pound coffee roaster. (Screen sold separately)